Adafruit

Compatibility: only for Raspberry Pi Zero / Zero W models. Function: enclosure for instrument. Dimensions: 70x35x13mm. Color: white/transparent

Material: heat resistant silicone. Configuration: flexible. Dimensions: 359 X 260 X 5mm. Color: black

Material: heat resistant silicone. Configuration: flexible. Dimensions: 450x350x6mm. Color: blue

Connectors: 4 USB sockets

Connectors: USB-A input, 3 USB + LAN outputs. Additional information: max. Spec info: compatible with USB 2.0 standard

Connectors: 4x USB sockets. Additional information: max. Spec info: compatible with USB 2.0 standard

Connectors: USB connector and 5 cables. Voltage: 3.3V. Microcontroller type: EIA/TIA-232 and V.28/V.24 interface communication

Conditioning unit: 1 sheet per package. Resistance: 31k Ohms-cm2. Note: specific value below 500 Ohms-cm. Dimensions: 28x28 cm. Thickness: 0.1mm. Spec info: Velostat/Linqstat pressure sensitive conductive layer

Input: 5V logic level input/outputs. Output: 20 I/O pin, 6 PWM output, 6 analog input. Dimensions: 18x44x4mm. Microcontroller type: ATmega328. Clock signal: 16 MHz. Vin input voltage (max): 16V. Vin input voltage (min): 6V

Input: 5V USB (micro USB connector). Connectors: 2 pole JST connector. Outputs: 5V 100mA or 5V 500mA with jumper adjustment. Microcontroller type: MCP73831. Spec info: for Li-Ion and LiPo batteries

Input: microUSB connector, 5 pin GPIO. Note: 256KB Flash 32 KB RAM 48 MHz. Note: SPI, I2C and serial port. Note: LED signaling (green-ON, red-pin13, 1x red/green/blue LED). Microcontroller type: ATSAMD21E18 32-bit Cortex M0+. Power supply: USB Or other external source

Connector: 40 GPIO. Dimensions: 2.4 inch. Note: TFT touch display, resolution 320x240

Conditioning unit: 1 sheet per package. Resistance: 1 ohm/50 cm in all directions. Note: can be ironed, heated, and dried on medium. Dimensions: 20x20 cm. Thickness: 0.08±0.01mm. Spec info: nylon, copper and nickel fabric